Sony Universal Remote RM VL600 User Manual

2-674-860-12 (1)

Integrated Remote

Commander

Operating Instructions

RM-VL600

Features

The RM-VL600 Remote Commander provides centralized control of all

your AV components from a single remote commander and saves the

trouble of operating different AV components with different remote

control devices. The following are its main features.

Centralized control of Sony AV components with this one remote

commander

This Commander is preset at the factory to operate Sony brand

components, so you can use it out of the box as a control center for your

Sony AV components.

Remote control signals for non-Sony components are also preset

This Commander is preset for most major brands components as well as

Sony. You can remote control your non-Sony components by setting the

type and code number of each component (page 10).

Learning function for programming various other remote control

signals

This Commander has a Learning function, to “learn” the remote control

signals needed to operate other non-preset components or functions. (To

“teach” such signals to this Commander, use the remote control supplied

with the non-preset components.) (page 16)

In addition, the Commander can “learn” remote control signals (infrared

signals only) of non-Audio Visual components such as air-conditioners,

lights, etc. (Some specific appliances or functions may not be available.)

(page 24)

Reassigning new components

You can assign Component Select buttons to freely operate other

components. This is useful when you have more than two of the same

kind of AV component (only if a Component Select button is free.) (page

33)

You can only assign TVs to the TV Component Select button.

You can only assign an amplifier or DVD/Receiver combo to the AMP

Component Select button.

Startup Guide

This guide shows you how to set the Remote Commander to operate

your components.

First, find the four-digit component code number for your

component, referring to the supplied “Component code numbers.”

If you have the code

number

If you cannot find the

code number

Example: To set up a TV of

the code number “8011”

You can search for the

component code available for

your component.

1 Set the Remote

Commander for code input

mode.

1 Set the Remote

Commander for code

input mode.

SET

Press SET and MENU.

2 Press the desired

Component Select button.

SET

DVD

SAT

CBL

DVD

SAT

CBL

VCR

TAPE

AMP

VCR

TAPE

AMP

3 Enter the code number.

3 Transmit code number

signals in turn.

POWER

4 Finish setting.

ENT

Press ENT.

Press CH + or CH –, and then

POWER. Repeat until your

component reacts.

4 Finish setting.

ENT

Press ENT.

For more details, see page 10.

For more details, see page 13.

Learning function

If your component does not work as supposed even if the code

number is set, make the RM-VL600 “learn” the functions of

your component’s remote control.

Example: To “teach” the N (play) signal of your video cassette

recorder to the VCR N button of the RM-VL600

1 Place the RM-VL600 head to

head with your VCR’s

remote control.

4 Press the button you

want to “teach.”

VCR’s remote

control

2 – 4 inches

(5 – 10 cm)

away (approx.)

5 Press and hold the N

(play) button of your

VCR’s remote control until

the VCR button of the

RM-VL600 lights up.

RM-VL600

2 Set the RM-VL600 for

“learning” mode.

Press and hold SET for at least

3 seconds until the SET

indicator flashes.

SET

6 Repeat Steps 4 and 5 to

“teach” other functions.

3 Press the desired

7 Finish setting.

Component Select button.

SET

VCR

Press SET.

For more details, see page 16.

Table of Contents

Getting Started

Installing the Batteries .................................................................................8

When to replace the batteries ............................................................................ 8

Location of Controls .....................................................................................9

Basic Operations

Setting the Code for non-Sony Preset Audio and Visual Components

— Setting component codes ...................................................................10

Setting a component code ................................................................................ 10

Checking if the code number works .............................................................. 12

Setting a Component Code by the Search Function ...................................13

Operating Your Components with the Remote Commander ......................14

To control the volume ....................................................................................... 15

Programming Signals of Another Remote Control — Learning Function...16

For accurate Learning ....................................................................................... 19

Programming remote control signals to the

Component Select buttons and System Control buttons .......................... 20

Changing or erasing the function of a “learned” button ............................ 22

Notes on programming the signals for an air-conditioner ......................... 24

Advanced Features

Controlling the Volume of Visual Components Connected to an Audio

System ......................................................................................................25

Adding an Extra Function to the Component Select Buttons .....................27

Programming the Power-On Command of the Selected Component just

by pressing that Component Select button

(for Sony Components only) ........................................................................ 27

Executing a Series of Commands — System Control Functions .................29

To clear programmed commands ................................................................... 31

Programming a Series of Commands to on the Component Select

Buttons .....................................................................................................32

To clear programmed commands ................................................................... 33

Assigning Other Components to the Component Select Buttons ..............33

Using Other Functions

Locking the Controls — Hold Function.......................................................34

Erasing all settings — To reset the Commander to its factory settings .....35

Additional Information

Precautions .................................................................................................36

Maintenance ...............................................................................................36

Specifications..............................................................................................36

Troubleshooting ..........................................................................................37

Appendixes

Table of Preset Functions............................................................................39

TV (ANALOG) .................................................................................................. 39

TV (DIGITAL) .................................................................................................... 40

VCR ..................................................................................................................... 41

CBL (Cable box) ................................................................................................. 41

SAT ...................................................................................................................... 42

DVD .................................................................................................................... 42

DVR (Digital video recorder) .......................................................................... 43

CD ....................................................................................................................... 44

MD....................................................................................................................... 44

DAT ..................................................................................................................... 45

DECK .................................................................................................................. 45

AMP .................................................................................................................... 45

Digital Cable Box .............................................................................................. 46

DAV (DVD/Receiver combo) ......................................................................... 46

Digital TV TUNER ............................................................................................ 47

Index ...........................................................................................................48

Getting Started

When to replace the

batteries

Installing the

Batteries

Batteries for remote control

operation (two size AA (R6)

batteries)

Under normal conditions, the

batteries will last up to six

months. If the Commander does

not operate properly, the batteries

might be drained. When this

happens, replace the batteries with

new ones.

Slide open the battery

compartment lid and insert two

size AA (R6) batteries (not

supplied). Be sure to match up the

+ and – indications on the

batteries with the + and –

indications on the battery

compartment.

Note

Do not take more than one hour to

replace the batteries. Otherwise, your

code number settings (page 10) and

“learned” remote control signals (page

16) will be erased.

Notes on batteries

• Do not use an old battery with a new

one, or mix different types of

batteries together.

• If the electrolyte inside the battery

should leak, wipe the contaminated

area of the battery compartment with

a cloth and replace the old batteries

with new ones. To prevent electrolyte

from leaking, remove the batteries if

you plan not to use the Commander

for a long period of time.

Insert the batteries (negative end

first) through the guide clamp

within each compartment as

shown above.

Location of Controls

1 SET indicator

2 SET button

TV/VIDEO

POWER

SET

3 Component Select buttons

Light or flash during operation.

4 Number buttons

5 DIGITAL/ANALOG button

6 VOL +/– buttons*

7 INFO button

8 MUTING button*

9 GUIDE button

0 EXIT button

qa Player Control buttons

qs TV/VIDEO button

qd POWER button

qf ENT (enter) button

qg TWIN VIEW button

qh CH (channel) +/– buttons

qj SLEEP button

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

GUIDE

EXIT

TOOLS

qk RECALL button

ql MENU button

w; Cursor Control buttons

wa TOOLS button

SYSTEM CONTROL

ws SYSTEM CONTROL buttons

wd DOT button

About tactile dots

The number 5 button, the B button and CH + button each have a tactile dot for ease

of use.

* Note on the VOL +/– and MUTING buttons

The Commander controls or mutes the TV’s volume when you select a visual

component. The Commander controls or mutes the amplifier’s volume when you

select an audio component. You can change this setting (page 25).

Note

The function of the control buttons varies depending on settings/operating modes.

The “Table of Preset Functions” (page 39) shows how the Commander generally

operates for each component in the factory preset mode.

Basic Operations

Setting a component code

Setting the Code for

non-Sony Preset

Audio and Visual

Components

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

— Setting

TUNER

TAPE

component codes

PHONO

DVD

The Commander is preset at the

factory to operate Sony brand AV

components (see the table below).

If you are using the Commander

with a factory-set Sony

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

components, skip the following

procedures.

GUIDE

You can use the Commander with

other major brand preset AV

components also. To use with

other AV components, or Sony

components which do not

function with the Commander,

you need to follow the procedures

to set the correct codes for each

component.

EXIT

TOOLS

SYSTEM CONTROL

Component

Preset

Factory setting

Select Button component(s)

Example: To set up a Philips’ TV

Sony TV

TV/VCR

Combo

1 See the tables in the

supplied “Component

Code Numbers,” and find

the four-digit component

code number for the

DVD

SAT

CBL

VCR

DVD player Sony DVD

player

Satellite

tuner

Sony satellite

tuner

Cable box

Analog cable

box

desired component.

VCR

Sony VHS

VCR

If more than one code number

is listed, use the number that is

listed first.

CD player

Sony CD

player

For example, to set up a

Philips’ TV, you would use the

code number 8011.

TAPE

AMP

Cassette

deck

Sony cassette

deck

Amplifier

Sony amplifier

Note

2 Press and while holding

An MD player and a DAV can be set to

any of the above Component Select

buttons. You can assign Component

Select buttons to freely set signals of

your desired components. For further

information, see “Assigning Other

Components to the Component Select

Buttons” (page 33) .

SET, press MENU.

SET

The SET indicator lights up.

For the functions of buttons as for each

component, see “Table of Preset

Functions” (page 39).

SET

Notes

• If you press a component code

number that is not on the table in the

supplied “Component Code

3 Press the Component Select

button for the desired

component.

Numbers,” or if you press a button in

the wrong order, the Component

Select button flashes five times, and

then turns off. Check the component

code number, and try setting it again.

• If you don’t input anything into the

Commander within 20 seconds

between each step, the setup

The SET indicator and the

selected Component Select

button lights up.

procedure will be canceled. To set the

code, start over from Step 2.

If you press SET while setting the

component code, all code numbers will

be lost, and the setup procedure will

be canceled. Start over from Step 2.

•

SET

DVD

SAT

CBL

VCR

TAPE

AMP

To cancel setup, press SET.

4 Press the Number buttons

to enter the four-digit

component code number.

5 Press ENT.

The SET indicator and the

Component Select button light

turns off.

If the Component Select button

flashes five times before

turning off, it means that the

setup is incomplete. Start over

from Step 2.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}1_ad1_.

If the Commander does not

seem to be working

Try repeating the setup procedure

using the other codes listed for your

component, or try setting the code

number using the Search function

(page 13).

Setting the Code for non-Sony

Preset Audio and Visual

Components — Setting

component codes (continued)

Checking if the code

number works

Note on the VOL+/– and MUTING

buttons

When you operate a visual

component, the TV button lights

up to indicate that the

1 Power on the component

with its power switch.

Commander is controlling or

muting the TV’s volume.

2 Press the corresponding

Component Select button

for the component you

have set up.

When you operate an audio

component, the AMP button lights

up to indicate that the

Commander is controlling or

muting the amplifier’s volume.

The Component Select button

lights up when you press it,

and turns off when you release

it.

AMP

It is recommended that you first

set the TV and AMP codes before

setting up any other components.

3 Aim the Commander at the

component and press

POWER.

Note on buttons that have

already “learned” remote

control signals

The selected Component Select

button lights up when you

press a function button, and

turns off when you release it.

If another signal has already been

programmed on a button using

the Learning function (page 16),

that “learned” signal will continue

to work even after you set the

component code number. To use it

as a preset function button, you

must first erase its “learned”

signal (page 22).

POWER

DVD

SAT

CBL

VCR

TAPE

AMP

The component should power

off.

4 If you have succeeded,

check that the Commander

is operating the other

functions of your

component, such as channel

and volume control.

See page 14 for details.

1 Press and while holding

Setting a Component

Code by the Search

Function

You can find a code number

available for a component that

doesn’t have one in the supplied

“Component code numbers.”

SET, press MENU.

SET

The SET indicator lights up.

SET

2 Press the Component Select

button for the desired

component.

Before starting the Search

function

Set each component to the

following status so that the Search

function works effectively.

TV, AMP: Power-on

CD player, MD player*, cassette

deck: Power-on with a playback

source (disc, cassette tape, etc.)

Other components: Power-off

The SET indicator and the

selected Component Select

button lights up.

SET

* If any of these components are

assigned to any of the

Component Select buttons (page

33), you can set a component

code using the Search function.

DVD

SAT

CBL

VCR

TAPE

AMP

3 Press CH + or CH – and

POWER in turn until the

component reacts as

described in the following.

TV: Powers off

VCR, CBL, DVD, AMP: Powers

CD player, MD player, cassette

deck: Plays back

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

DIGITAL

VOL

/ANALOG

POWER

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

Press CH + to go to the next

code number.

Press CH – to go back to the

previous code number.

GUIDE

EXIT

TOOLS

The Component Select button

flashes three times after the

numbers have turned one cycle.

One cycle means, for example,

the four-digit code numbers

beginning from “8” are cycled

through.

SYSTEM CONTROL

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}1_ad3_.

Setting a Component Code by

the Search Function (continued)

Operating Your

Components with the

Remote Commander

4 Press ENT.

ENT

When you operate a non-Sony

component, make sure you set the

component code first (page 10).

The SET indicator and the

Component button turns off.

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

If the Component Select button

flashes five times before turning

off, it means that the setup is

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

incomplete. Start over from Step 1.

PHONO

DVD

ENT

5 Check if the code number

works by following the

instructions on page 12.

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

Notes

MUTING

RECALL

• If you don’t input anything into the

Commander within 20 seconds

between each step, the setup

procedure will be canceled. To set the

code, start over from the beginning.

• If you press any button other than

CH +/– and POWER while setting

the component code, all code

numbers will be lost, and the setup

procedure will be canceled. Start over

from the beginning.

GUIDE

EXIT

TOOLS

SYSTEM CONTROL

To cancel setup, press SET.

Example: To operate a video

cassette recorder

1 Press the desired

Component Select button.

The Component Select button

lights up when you press it,

and turns off when you release

it.

VCR

2 Press any Player Control

To control the volume

Press VOL +/– to control the

volume. Press MUTING to mute

the sound.

button.

See “Table of Preset Functions”

(page 39) for the functions of

buttons for each component.

When you select a visual

component, the TV’s volume will

be controlled (TV Component

Select button lights up), and when

you select an audio component,

the amplifier’s volume will be

controlled (AMP Component

Select button lights up). You can

change this setting (page 25).

Note

The remote control signals may be

different for some components or

functions. In this case, program the

remote control signals with the

Learning function (page 16). Note,

however, that components and

functions that do not support the

remote control of infrared signals will

not work with this Commander.

Notes

• If you used the Learning function

(page 16) to program the VOL +/– or

MUTING button to send a signal to

any other component, that signal will

be transmitted instead of the volume

or muting of the TV or amplifier

when you select that component.

• If you used the Learning function

(page 16) to program the VOL +/– or

MUTING button for the TV or AMP

buttons to send a signal to any other

component, that signal will be

transmitted only when you select TV

or AMP. When you select another

component, the preset volume control

signals for TV or AMP will be

transmitted.

• If you have assigned another

component to the TV or AMP buttons

(page 33), the volume of the TV or

amplifier cannot be controlled even if

you select another component.

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}1_ad5_.

2,7

Programming Signals

of Another Remote

Control — Learning

Function

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

To operate components or

PHONO

functions which do not work even

if you set a component code

number, use the following

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

Learning procedure to “teach” any

of the programmable buttons of

the Commander to operate the

functions of another remote

control. You can also use the

Learning function to change the

signals of individual buttons after

setting the component code

number (page 10). It is

INFO

MUTING

RECALL

GUIDE

EXIT

TOOLS

SYSTEM CONTROL

recommended that you make a

note of the “learned” key

functions. (It is possible to make a

note on the back of the supplied

“Component code numbers.”)

Notes

• Some specific remote control signals

may not be “learned.”

• You can also use a display monitor

for computer display (including a

built-in tuner type), if the

Commander is “learned.”

Example: To program the N

(Play) signal of your video

cassette recorder to theVCR N

(Play) button of the Commander

1 Place the RM-VL600 head

to head with your

component’s remote

control.

Remote control for

your component

about 2 – 4 inches

(5 – 10 cm) away

RM-VL600

2 Press and hold SET for over

4 Press the button on the

Commander you want to

“teach.”

3 seconds.

SET

The SET indicator flash.

The SET indicator flashes and

the selected Component Select

button lights up. (Learning

function standby).

SET

DVD

SAT

CBL

VCR

TAPE

AMP

SET

DVD

SAT

CBL

3 Press the Component Select

button for the component

whose signals are to be

“learned.”

VCR

TAPE

AMP

If another signal has already

been “learned” by that

button

VCR

The SET indicator flashes

twice, and the Commander

takes no action returning to its

state after the Component

Select button was pressed in

Step 3. Either “teach” to

another free button, or clear the

already “learned” function

(page 22) and start over from

the beginning.

The SET indicator flashes and

the selected Component Select

button light up.

SET

DVD

SAT

CBL

VCR

TAPE

AMP

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}1_ad7_.

Notes

Programming Signals of Another

Remote Control — Learning

Function (continued)

• If you do not perform Learning steps

within 20 seconds at any point during

the process, Learning mode ends.

• If you do not perform Step 5 within

10 seconds after Step 4, the learning

procedure returns to Step 3. Repeat

Step 4 while the Component Select

button lights.

5 Press and hold the button

on the other remote control,

until both the SET indicator

and the Component Select

button lights up again.

To cancel setup, press SET.

If the Commander does not

seem to be working

During data transfer, only the

SET indicator stays lit, and the

Component Select button turns

off.

After data transfer is complete,

the Commander returns to its

state in Step 3.

If the “learned” button does not

operate properly, “teach” once again.

(For example, if the volume becomes

very loud after pressing VOL + only

once, noise may have interfered during

the Learning procedure.)

If you set a component code

after “learning” a signal

If you have programmed any signal on

a button by the Learning function, that

signal will work even after you set a

component code.

remote control

of component

Note on the REC z signal

You can only “teach” to one button at a

time. Therefore you cannot teach a

sequential button operation (for

example REC z + B) to a single button

on the Commander. In this case,

“teach” the functions of each button on

your component to the Commander.

SET

VCR

during data

transfer

data transfer

complete

If the SET indicator flashes

five times

It means that “learning” is

incomplete. Repeat steps 4 and 5.

6 Repeat Steps 4 and 5 to

“teach” functions to other

buttons.

To “teach” another

component’s remote control

signal

After positioning the two remote

commanders as in Step 1 on page

16, press the corresponding

Component Select button, and then

follow Steps 4 and 5 to perform

Learning.

7 Press SET to finish setting.

When you “teach” signals to

VOL +/– or MUTING

For accurate Learning

•Do not move the remote units

during the Learning procedure.

•Be sure to keep holding down

the “learning” button until your

Commander reacts as described.

•Use fresh batteries in both

remote units.

•Avoid Learning in places subject

to direct sunlight or a strong

fluorescent light. (Noise may

interfere during the Learning

procedure.)

•The remote control detector area

may differ depending on each

remote unit. If Learning does not

work, try changing the positions

of the two remote control units.

•When you teach signals of an

interactive signal exchange

system remote control unit

(supplied with some of Sony’s

amplifiers) to the Commander,

the response signal of the main

unit may interfere with the

learning of the Commander. In

such a case, move to a place

where the signals will not reach

the main unit (e.g. other rooms,

etc.).

•If you used the Learning

function to program the VOL +/–

or MUTING buttons to send any

signal to components other than

the TV or AMP, that signal will

be transmitted only by pressing

VOL +/– or MUTING when you

select that component.

•If you used the Learning

function to program the VOL +/–

or MUTING buttons to send any

signal to the TV or AMP, that

signal will be transmitted only

after you select TV or AMP.

When you select other

components, the “learned”

signal will be transmitted.

To “teach” the signals for an

air-conditioner

See “Notes on programming the

signals for an air-conditioner” on

page 24.

IMPORTANT

Be sure to place the

Commander out of the reach of

small children or pets, and lock

the controls using the Hold

function (page 34).

Components such as air

conditioners, heaters, electric

appliances, and electric

shutters or curtains receiving

an infrared signal can be

dangerous if misused.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}1_ad9_.

Programming signals of another

remote control — Learning

Function (continued)

2 Press and hold the

Component Select button

for the component whose

signals are to be “learned”

for over 3 seconds.

Programming remote

control signals to the

Component Select buttons

and System Control

buttons

DVD

To teach signals to the SYSTEM

CONTROL buttons, press and

hold the desired SYSTEM

CONTROL button for over 3

seconds.

You can “teach” one operating

procedure to a Component Select

button and System Control

buttons, so that when you press

the Component Select button and

System Control buttons, the

operation is also automatically

done.

For example, if it is necessary to

switch the input selection of an

amplifier to DVD when you use a

DVD player, “teach” an input

select signal to the DVD button.

After “learning,” the input

selection of an amplifier is

automatically switched to DVD

just by pressing DVD. (For this

operation, the amplifier should

first be turned on.)

Both the SET indicator and the

selected Component Select

button light up.

SET

DVD

SAT

CBL

VCR

TAPE

AMP

When you “teach” signals to

the SYSTEM CONTROL

buttons, only the SET indicator

lights up.

When the SET indicator lights

up, you can release the

Component Select button. The

SET indicator flashes and the

selected Component Select

button lights up (Learning

function standby).

Example: To “teach” the DVD

input remote control signal of

your amplifier to the DVD

Component Select button of the

Commander

SET

1 Follow Steps 1 to 2 (page

DVD

SAT

CBL

16).

VCR

TAPE

AMP

When you “teach” signals to

the SYSTEM CONTROL

buttons, you can release the

SYSTEM CONTROL button

when the SET indicator lights

up. The SET indicator lights

up, but the SYSTEM

CONTROL button does not

light up.

If another signal has already

been “learned” by that

button

The SET indicator flashes twice,

and the Commander takes no

action, returning to its state after

SET was pressed and held in Step 2.

Either “teach” to another free

button, or clear the already

“learned” function (page 22) and

start over from the beginning.

3 Press and hold the button

on the other remote control,

until the SET indicator

lights and all the

Component Select buttons

flash again.

During data transfer, only the

SET indicator stays lit, and the

Component Select button turns

off.

If the SET indicator flashes

five times

It means that “learning” is

incomplete. Repeat Steps 2 and 3.

4 Repeat Steps 2 and 3 to

“teach” remote control

signals to other buttons.

5 Press SET to finish

“learning.”

Notes

• If you do not perform Learning steps

within 20 seconds at any point during

the process, Learning mode ends.

• If you do not perform Step 3 within

10 seconds after Step 2, the Learning

procedure returns to Step 1. Repeat

from Step 2 while the Component

Select button is lit.

To cancel “learning,” press SET.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}2_ad1_.

Programming signals of another

remote control — Learning

Function (continued)

Example: To erase the “learned”

function from the Number

button 1 in VCR mode

1 Press and hold SET for over

Changing or erasing the

function of a “learned”

button

3 seconds.

SET

To change the “learned” function,

clear it first and perform Learning

again.

The SET indicator flashes.

SET

To clear the “learned” function

of a single button

DVD

SAT

CBL

VCR

TAPE

AMP

1,3

TV/VIDEO

POWER

SET

2 While holding the desired

Component Select button

pressed, press the button

you want to erase.

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

VCR

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

When erasing of the “learned”

function is completed, the

selected Component Select

button light turns off.

INFO

MUTING

RECALL

GUIDE

SET

EXIT

TOOLS

VCR

during data

erasing

data erasing

complete

SYSTEM CONTROL

Note

Be sure to press the button you

want to erase while pressing the

Component Select Button. If you

release the Component Select

button, the Commander changes to

Learning mode.

3 Press SET to finish setting.

To cancel erasing, press SET.

To erase the learned function of

the Component Select button

and System Control buttons

To clear all function signals

“learned” for a specific

Component Select button

Example: To erase the function

“learned” by the TV button

1,3

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

1 While holding SET pressed,

press and hold the TV

Component Select button

for over 3 seconds.

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

SET

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

DVD

SAT

CBL

VCR

TAPE

AMP

INFO

MUTING

RECALL

GUIDE

SET

EXIT

TOOLS

DVD

SAT

CBL

VCR

TAPE

AMP

SYSTEM CONTROL

When erasing of a “learned”

function is completed, the SET

indicator light turns off.

To erase the learned

function of a SYSTEM

CONTROL button

While holding SET pressed, press

and hold the desired SYSTEM

CONTROL button for over 3

seconds.

Example: To erase all functions

“learned” by the VCR button

1 Press and hold SET for over

3 seconds.

SET

The SET indicator flashes.

SET

DVD

SAT

CBL

VCR

TAPE

AMP

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}2_ad3_.

Programming signals of another

remote control — Learning

Function (continued)

Notes on programming the

signals for an air-

conditioner

2 While holding x pressed,

press the Component Select

button you want to erase.

About seasonal adjustments

If you change the settings of the

air-conditioner for the season, you

have to program the remote

control signals of the new settings

on the Commander.

VCR

If the power-on/off operation

does not work correctly

When erasing of a “learned”

function has completed, all the

other Component Select button

lights turn off.

If the Commander can only

operate “ON” with one button

and “OFF” with another, while

your air-conditioner’s remote

control can operate “ON/OFF”

with a single button, program the

signal on two buttons of the

Commander as follows.

SET

VCR

during data

erasing

data erasing

complete

1 Clear the “learned” power-on/

off signal on the programmed

button of the Commander.

2 Reprogram only the power-on

signal of the air-conditioner on

the button of the Commander

by following the steps of

Notes

• With this operation, you can only

erase the “learned” functions of

all buttons for a specific

component.

• To erase a single “learned”

function of a Component Select

button, see page 22.

“Programming signals of

another remote control-

3 Press SET to finish setting.

Learning Function” (page 16).

3 Program the power-off signal of

the air-conditioner on another

button of the Commander.

To cancel erasing, press SET.

The two buttons of the

Commander have been

programmed with the power-on

signal and the power-off signal of

the air-conditioner respectively, so

that you can operate the air-

conditioner with the Commander.

Advanced Features

To change the Factory Preset of

the Volume Control

Controlling the Volume

of Visual Components

Connected to an Audio

System

The Commander is factory preset

based on the assumption that you

hear the sound of your visual

components from your TV

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

speakers, and that you hear sound

of your audio components from

the loudspeakers connected to

your amplifier.

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

For example, to control the

volume while using a VCR, you

don’t need to press the TV button

to control the TV volume.

GUIDE

EXIT

TOOLS

The following table shows the

factory setting of which volume

would be controlled for each

component.

SYSTEM CONTROL

Component Select

button

Controls the volume of

VCR

CBL

DVD

SAT

AMP

1 Press and while holding

SET, press MENU.

amplifier

SET

TAPE

However, if your visual

The SET indicator lights up.

components are connected to an

audio system, you may want to

hear TV or VCR sound from the

loudspeakers via your amplifier or

DAV, not from your TV speakers.

In this case, you need to change

the factory preset so that you can

control the volume of your visual

components without first having

to switch to the amplifier or DAV.

SET

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}2_ad5_.

Controlling the Volume of Visual

Components Connected to an

Audio System (continued)

To set only the audio

components’ volume controls

to AMP

Press VOL – while holding

MUTING pressed.

2 While holding MUTING

pressed, press VOL + or

VOL –.

Only AMP lights up when you

press these buttons, and then

turns off when you release them.

To set all volume controls to

AMP

Press VOL + while holding

MUTING pressed.

All Component Select buttons

light up when you press these

buttons, and then turn off

when you release them.

Press and while holding VOL–,

press MUTING.

DVD

SAT

CBL

VCR

TAPE

AMP

Volume control setting complete.

DVD

SAT

CBL

Press and while holding VOL+,

press MUTING.

VCR

TAPE

AMP

DVD

SAT

CBL

Visual components are:

TV, video cassette recorder,

analog cable box, digital cable

box, digital satellite tuner,

DVD player, digital video

recorder

Audio components are:

CD player, MD player,

cassette deck, amplifier, DAV

VCR

TAPE

AMP

Volume control setting complete.

DVD

SAT

CBL

VCR

TAPE

AMP

To cancel setting, press SET.

Notes

• If you used the Learning function to

program the VOL +/– or MUTING

buttons to send a signal to a

component, the procedure above will

not change the function of the VOL

+/– and MUTING buttons.

Example: To clear the Power-on

command

Adding an Extra

Function to the

Component Select

Buttons

1 Press and while holding

SET, press MENU.

SET

Programming the Power-On

command of the selected

component just by pressing

that Component Select

button (for Sony

The SET indicator lights up.

SET

2 While holding POWER

pressed, press the desired

Component Select button.

components only)

When a code number of a Sony

component is set to a Component

Select button, the Power-On signal

is automatically programmed to

the button. You can select the

desired component and power it

on by just pressing that

While the POWER button is

pressed, the Component Select

buttons that Sony components

are set to flash in the following

order.

TVtDVDtSATtCBLt

VCRtCDtTAPEtAMP

The Component Select buttons

that Sony components are not

set to do not flash.

Component Select button.

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

GUIDE

EXIT

TOOLS

SYSTEM CONTROL

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}2_ad7_.

To cancel the setting, press SET.

To program the Power-On

command

Repeat the same procedure,

pressing the desired Component

Select button.

Notes

• If the component code of a non-Sony

brand has been set on a Component

Select button, you cannot program

the Power-On function on it. If you

change the component code (page 10)

after setting the Power-On function,

the Power-On function is cleared.

(The Component Select button flashes

twice to indicate that you cannot set

this function.)

• Even if you used the Learning

function (page 16) to program a

signal on a Component Select button,

you can program the Power-On

function on that button but it cannot

be used. If you clear the “learned”

function on that button, you can use

the Power-On function.

Example: To watch a video, you

can set a series of operations as

follows:

Executing a Series of

Commands — System

Control Functions

With the System Control function,

you can program a series of

operating commands, and execute

them by pressing just one button.

You can program up to 16

consecutive operation steps to

each of the SYSTEM CONTROL

buttons (A – D).

If you have set the System Control

function for a Component Select

button (page 33), the execution of

the programmed commands

begins when you press the

Power on the TV.

Power on the video (VCR).

Power on the amplifier.

Set the input selector of the

amplifier to VIDEO 1.

Set the input mode of the TV

to VIDEO 1.

Start video playback.

Component Select button for more

than 2 seconds.

When executing the programmed

commands, each remote

1,3

TV/VIDEO

POWER

SET

commander signal is transmitted.

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

GUIDE

EXIT

TOOLS

SYSTEM CONTROL

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}2_ad9_.

Example: To program the

procedure above to the SYSTEM

CONTROL B button

To program a new series of

operations for those buttons

which already have a control

program set

1 Press and while holding

SET, press the SYSTEM

CONTROL B button.

Erase the program (page 31).

Notes

• If you interrupt the procedure at any

point for over 20 seconds, the setting

mode ends and the series of

The SET indicator light turns

on.

commands will be programmed up to

that point. In this case, clear the

program (page 31) and start again

from Step 1 to set the entire program

from the beginning. You cannot

continue programming once the

setting mode ends.

• If a SYSTEM CONTROL button has

already “learned” a remote control

signal (page 16), you can program a

System Control function (System

Control Macro), but the function does

will not work until you clear the

Leaning function. To clear the

Learning function, see “Changing or

erasing the function of a “learned”

button” on page 22.

SET

If a System Control function

(System Control Macro) has

already been set on the button,

the SET indicator flashes twice.

The setting procedure is

automatically canceled.

2 Set the System Control

function.

With this example, press

buttons in sequence as below:

• If you change the component code

number (page 10) or program a new

signal by using the Learning function

(page 16) on a key or a button that

has been programmed with a series

of commands using the System

Control function, the new signal will

be transmitted when you press the

corresponding SYSTEM CONTROL

button.

POWER

VCR

POWER

AMP

• While in setting mode, you cannot

clear any operation step you have

programmed. If you have

VIDEO1

TV/VIDEO

programmed an incorrect operation

by mistake, start again from Step 1.

• If you try to program more than 16

steps, the System Control setting

mode ends, and the 16 steps you have

programmed are registered. If you

want to program the steps again,

clear the program (page 31) and start

again from Step 1.

VCR

You can program up to 16

consecutive steps on each of

the SYSTEM CONTROL

buttons (A – D), including the

initial step of pressing switch

to a Component Select button.

3 Press SET to complete the

programming.

The SYSTEM CONTROL

button light turns off.

Executing a Series of Commands

— System Control Functions

(continued)

To clear programmed

commands

Tips for programming the

System Control functions

1 Press and while holding

SET, press and hold for

more than 3 seconds the

SYSTEM CONTROL button

you want to clear.

The following information helps

you to program a consecutive

operation steps.

About the order of operation

steps

Some of the components may not

accept consecutive remote control

signals. For example, some TVs

generally may not respond to the

next signal right after the Power-

on signal. So, a series of

commands such as TV Power-on

and input select may not work

properly.

In this case, insert other signals to

other components such as in the

example below:

TV Power-ontVCR Power-ont

VCR playbacktTV input select

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}3_ad1_.

The SET indicator and the VCR

Component Select button lights

turn on.

Programming a

Series of Commands

on the Component

Select Buttons

SET

DVD

SAT

CBL

VCR

TAPE

AMP

As with the SYSTEM CONTROL

buttons, you can also program a

series of operating commands for

the Component Select buttons (up

to 16 steps).

If a Control Program function

(Component Macro) has

already been set on the button,

the button flashes twice. The

setting procedure is

To execute the commands

automatically canceled.

programmed on a Component

Select button by the System

Control function, press the button

for more than 2 seconds.

2 Set the Control Program

function.

With this example, press the

buttons in sequence as below:

1,3

TV/VIDEO

POWER

SET

VCR

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

POWER

AMP

PHONO

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

VIDEO1

TV/VIDEO

INFO

MUTING

RECALL

GUIDE

EXIT

TOOLS

VCR

You can program up to 16

consecutive steps on each of

the Component Select buttons,

including the first step of

pressing to select a Component

Select button.

SYSTEM CONTROL

Notes

• When you press the button for less

than 2 seconds, it works as a normal

Component Select button, and the

programmed function does not work.

See also “Tips for programming the

System Control functions” on page 31.

3 Press SET to complete the

•

programming.

The VCR Component Select

button light turns off.

Example: To program the

procedure on page 29 for the

VCR Component Select button

1 Press and while holding

SET, press the VCR

Component Select button.

Programming a Series of

Commands on the Component

Select Buttons (continued)

Assigning Other

Components to the

Component Select

Buttons

To clear programmed

commands

You can assign another

component to any of the

Component Select buttons not

being used.

Once if you set a Component

Select button to a different type of

component, the entered

component‘s code number

becomes effective.

1 Press and while holding

SET, press and hold for

more than 3 seconds the

Component Select button

you want to clear.

Notes

• You can program a Control Program

function (Component Macro) for a

Component Select button on which

the Power-On function (page 27) has

been programmed. In this case, the

Power-On function is executed when

you press the Component Select

button, or when you select another

component while the consecutive

Control Program is being executed.

• If the procedure is interrupted the at

any point for over more than 20

seconds, the setting mode ends and

the series of commands will be

programmed up to that point. In this

case, clear the program (page 33) and

start again from Step 1 to set the

entire program from the beginning.

You cannot continue programming

once the setting mode ends.

Notes

• To use the original component

setting, set the component code

number again (page 10).

• If you enter a new brand‘s

component code number without

clearing the previous “learned”

functions on that Component Select

button, the previously “learned”

functions remain effective. Erase the

functions you do not use frequently.

• You can only assign a TV to the TV

Component Select button.

• If a Component Select button has

already “learned” a remote control

signal (page 16), you can program a

Control Program function

(Component Macro), but the function

does will not work until you clear the

“Learned” Function. To clear the

Learning Learned Function, see

“Changing or erasing the function of

a “learned” button” on page 22.

• While you are setting a program, you

can insert a 0.4 second interval before

the next step is executed by pressing

the same Component Select button

again. For the example above in the

step 2, you can insert a 0.4 second

interval between the TV-on signal

and the TV/VIDEO switching signal

at the exercising as the program is

executed by pressing the buttons

TVtPOWERtTV.

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}3_ad3_.

Using Other Functions

1 Press and while holding

POWER, press TV/VIDEO

and CH +.

Locking the Controls

— Hold Function

To prevent accidental operation,

you can lock all the buttons with

the Hold function.

TV/VIDEO

POWER

The SET button and the

TV/VIDEO

POWER

SET

Component Select button

currently selected flash once,

and the Hold function is set.

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

SET

PHONO

DVD

SAT

CBL

DVD

ENT

DIGITAL

VOL

VCR

TAPE

AMP

/ANALOG

TWIN VIEW

SLEEP

All the buttons are locked.

INFO

MUTING

RECALL

GUIDE

SET

(once)

EXIT

TOOLS

DVD

SAT

CBL

VCR

TAPE

AMP

SYSTEM CONTROL

While the Hold function is on,

no function can be operated.

(The SET button and the

Component Select button

currently selected flash twice.)

SET

(twice)

DVD

SAT

CBL

VCR

TAPE

AMP

To unlock the control

Press and while holding POWER,

press TV/VIDEO and CH –.

The SET button and the

Component Select button

currently selected flash once, and

the Hold function is released.

SET

(once)

DVD

SAT

CBL

VCR

TAPE

AMP

1 While holding POWER

pressed, press TV/VIDEO

and VOL –.

Erasing All Settings

— To reset the

VOL

Commander to its

factory settings

TV/VIDEO

POWER

You can erase all remote control

signals programmed by the

“learned“ function to reset the

Commander to its factory settings.

When pressing the POWER

button and the TV/VIDEO

button, all the Component

Select buttons go off. When

pressing the VOL – button

while holding down the

POWER button and the TV/

VIDEO button, the SET

TV/VIDEO

POWER

SET

DVD

SAT

CBL

AMP

AUX

VCR

TAPE

VIDEO1

VIDEO2

TUNER

TAPE

PHONO

indicator lights up and the

Component Select buttons light

up one by one. When the SET

indicator turns off at last, all

settings are cleared, and the

Commander returns to its

original state.

DVD

ENT

DIGITAL

VOL

/ANALOG

TWIN VIEW

SLEEP

INFO

MUTING

RECALL

GUIDE

SET

EXIT

TOOLS

DVD

SAT

CBL

VCR

TAPE

AMP

SYSTEM CONTROL

SET

DVD

SAT

CBL

VCR

TAPE

AMP

SET

DVD

SAT

CBL

VCR

TAPE

AMP

SET

DVD

SAT

CBL

VCR

TAPE

AMP

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}3_ad5_.

Additional Information

Precautions

Specifications

•Do not drop the unit or give a

shock to the unit, or it may cause

a malfunction.

•Do not leave the unit in a

location near heat sources, or in

a place subject to direct sunlight,

excessive dust or sand, moisture,

rain or mechanical shock.

•Do not put foreign objects into

the unit. Should any liquid or

solid object fall into the unit,

have it checked by qualified

personnel before operating the

unit any further.

Operating distance

Approx. 32.8 ft (10 m) (varies

depending on components of

different manufacturers)

Power requirements

Two size AA (R6) batteries

Battery life

Approx. 1 year (varies depending on

frequency of button use - up to

approx. 300 times per day.)

Dimensions

Approx. 2 ¹/8 × 8 ³/4 × 1 ³/16 in

(53 × 220 × 29 mm) (w × h × d)

Mass

Approx. 4.8 oz (135 g) (not including

batteries)

•Do not expose the remote control

detectors of your components to

direct sunlight or other strong

illumination. Too much light

there can interfere with remote

control operations.

Design and specifications are subject to

change without notice.

•Be sure to place the Commander

out of the reach of small children

or pets. Components such as air

conditioners, heaters, electric

appliances, and electric shutters

or curtains receiving an infrared

signal can be dangerous if

misused.

Maintenance

Clean the surface with a soft cloth

slightly moistened with water or a

mild detergent solution. Do not

use any type of solvent such as

alcohol, benzene or thinner as they

may damage the finish of the

surface.

Troubleshooting

If you have problems setting up or using the Remote Commander, first

check the batteries (page 8), then check the items below.

Symptom

Remedy

You cannot operate

components.

• Move closer to the component. The maximum operating

distance is approximately 32.8 ft. (10 m).

• Check that you are aiming the Commander directly at the

component, and that there are no obstructions between the

Commander and the component.

• Power on the components first, if necessary.

• Make sure you have pressed the correct Component Select

button. In case of CBL or DVD, make sure the desired

component is selected.

• Check that the component has infrared remote capability. For

example, if your component didn’t come with a remote

commander, it probably isn’t capable of being controlled by a

remote commander.

• You have assigned a different component to the Component

Select button. Check the component assigned to that button

and the component code.

You cannot control the

volume.

• If your visual components are connected to an audio system,

make sure you have set up the Commander as described in

“Controlling the Volume of Visual Components Connected to

an Audio System” (page 25).

• You have assigned another component on the TV or AMP

button (page 33). In this case, the volume cannot be controlled

when you select components other than a TV or AMP.

The Component Select

buttons flash by a

• Batteries are weakened.

Replace them with new ones.

constant interval when

you press a button.

You cannot operate a

component even after

setting the component

code numbers.

• Set the component code correctly. If the code that is listed first

for your component does not work, try all the codes for your

component in the order in which they are listed in the

supplied “Component Code Numbers.”

• Some features may not be preset. If some or all of the buttons

do not function correctly even after you have set the

component codes, then use the Learning function to program

the remote control signals for the component (page 16).

• The component may be operated with a code number that is

not listed in the “Component code numbers”. See “Setting a

Component Code by the Search Function” (page 13) and try

setting a code number again with the Search function.

The Commander fails to • When you teach signals of an interactive signal exchange

learn the remote control

signals.

system remote control unit (supplied with some of Sony’s

amplifiers) to the Commander, the response signal of the

main unit may interfere with the learning of the Commander.

In such a case, move to a place where the signals will not

reach the main unit (e.g., another room, etc.).

You cannot operate a

component even after

you programmed the

remote control signals

with the Learning

function.

• Make sure that the Remote Commander has “learned” the

correct signals. If not, see “For accurate Learning” (page 19)

and try the Learning procedure again (page 16).

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}3_ad7_.

Troubleshooting (continued)

Symptom

Remedy

The SET indicator flashes • Learning has not succeeded. See “For accurate Learning”

five times during the

Learning procedure.

(page 19) and try the Learning procedure again (page 16).

• There are no available buttons for “learning”. Clear

infrequently used Learned functions (page 22), then carry out

learning procedure.

A Component Select

button flashes five times

during setting.

• The component codes cannot be set. See the supplied

“Component Code Numbers” and try setting the component

codes again (page 10).

The SET indicator flashes • A selected Component Select button or another button to be

twice during the

Learning procedure.

set has any remote control signals programmed by Learning

function (page 16). Clear the “learned” signals (page 22) or

select another button which has no “learned” signals, and try

setting again.

All Component Select

buttons flash twice.

• The Hold function is on. Unlock the Hold function (page 34).

After programming the • A Learning function has already been set on the Component

Power-On command of a Select button. If a Learning function has been set (page 16),

component, pressing that you can program the Power-On function on the Component

Component Select button Select button (page 27) but the Power-On setting will not

does not function

correctly.

work until you clear the “learned” function. Erase the

“learned” function after the setting the Power-On function.

This function is for Sony components only.

The System Control

function or Control

Program function does

not work properly.

• When you program a System Control function or Control

Program function, make sure to follow the correct steps

(pages 29, 32).

• Change the direction the Remote Commander is aimed. If the

problem persists, position the programmed components

closer together.

• If the remote control receivers of the components are too far

apart, or if something is blocking the signals between them,

some of the components may not operate in sequence even

after you press the programmed button. If some of the

components do not operate correctly because of the above or

any other reason, position the components back to the way

they were before you set the System Control function or

Control Program function. Failure to do this can result in

incorrect operation when you use these functions again.

• Some components may not always be powered on by the

System Control function or Control Program function. This is

because the power of the component turns on and off

alternately when receiving the power on/off signal. In this

case, check the operating component‘s power on/off state

before using the System Control function.

• If you change the AV brands‘ component code number (page

10) set on a Component Select button that has been

programmed for a series of commands by the Control

Program function, the new signal will be transmitted when

you press the corresponding Component Select button.

• The intervals between steps may be too short. Depending on

the components, you may need to insert an interval between

consecutive controls. You can insert an interval by changing

the order of pressing the buttons. (You can insert an interval

between steps when programming the Component Select

button.)

• If a SYSTEM CONTROL button or a Component Select button

has already “learned” a remote control signal (page 16), you

can program a System Control function (System Control

Macro) or a Control Program function (Component Macro),

but the function will not work until you clear the Learned

function. To clear the Learned function, see “Changing or

erasing the function of a “learned” button” on page 22.

For the customers in the U.S.A

Customer Support Information

After you have read through this manual, if you still cannot get the Remote

Commander to work properly, call the Sony Customer Support Helpline

at 1-800-822-2217.

Appendices

KEY DISPLAY

FUNCTION

qjf

To move the cursor

upward.

Table of Preset

Functions

qjF

To move the cursor

downward.

qjG

qjg

qjOK

To move the cursor to

the right.

TV/VIDEO

To move the cursor to

the left.

POWER

SET

DVD

SAT

CBL

AMP

AUX

To enter the selection of

the MENU display.

VCR

TAPE

VIDEO1

VIDEO2

qsTWIN VIEW To turn on/off the

(PIP ON/OFF) “window” picture.

TUNER

TAPE

(PIP CH +)

To change the TV

channel + in the

“window” picture.

PHONO

DVD

ENT

DIGITAL

VOL

(PIP CH –)

To change the TV

channel – in the

“window” picture.

/ANALOG

TWIN VIEW

SLEEP

8REC z

To change the input

(PIP INPUT) mode of the “window”

picture.

INFO

MUTING

RECALL

GUIDE

(PIP STILL) picture.

8N To swap the “main”

To freeze the “window”

EXIT

TOOLS

(PIP SWAP) picture and the

“window” picture.

To move the location of

(PIP MOVE) the “window”picture.

SYSTEM CONTROL

qdCH +/–

Channel up: +

Channel down: –

qgRECALL

To operate JUMP,

FLASHBACK or

CHANNEL RETURN

function on the TV

depending on the setting

of the TV’s

manufacturer.

Note

3VOL +/–

Volume up: +

There may be some components or

Volume down: –

functions that cannot be operated with

this Commander.

5MUTING

To mute the volume on

the TV. Press again to

turn muting off.

6GUIDE

(EPG)

To use the program

guide.

TV(ANALOG)

KEY DISPLAY

9POWER

1qaw;

FUNCTION

7EXIT

To exit the mode.

To turn on and off.

To change the channel.

qkTOOLS

(OPTION)

To go into the OPTION

setting mode.

1 – 9, 0, ENT, For example, to change

DOT

to channel 5, press 0 and

5 (or, press 5 and ENT).

q;TV/VIDEO To change the input

mode.

4INFO

(DISPLAY)

To display the current

channel on TV.

qfSLEEP

To operate SLEEP

function on the TV

(works only for a TV

with SLEEP function).

qhMENU

To call up the MENU

display.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}3_ad9_.

Table of Preset Functions

(continued)

KEY DISPLAY

FUNCTION

TV(DIGITAL)

5MUTING

To mute the volume on

the TV. Press again to

turn muting off.

KEY DISPLAY

9POWER

1qaw;

FUNCTION

To turn on and off.

To change the channel.

6GUIDE

(EPG)

To use the program

guide.

1 – 9, 0, ENT, For example, to change

7EXIT

To exit the mode.

DOT

to channel 5, press 0 and

5 (or, press 5 and ENT).

2DIGITAL/

ANALOG

To select DIGITAL/

ANALOG

q;TV/VIDEO To change the input

qkTOOLS

(OPTION)

To go into the OPTION

setting mode.

mode.

4INFO

(DISPLAY)

To display the current

channel on TV.

qfSLEEP

To operate the SLEEP

function on the TV

(works only for a TV with

the SLEEP function).

qhMENU

qjf

To call up the MENU

display.

To move the cursor

upward.

qjF

To move the cursor

downward.

qjG

To move the cursor to

the right.

qjg

To move the cursor to

the left.

qjOK

To enter the selection of

the MENU display.

qsTWIN VIEW To turn the “window”

(PIP ON/OFF) picture on/off.

(VIDEO 3)

To select the input

source.

VIDEO 3

(VIDEO 1)

To select the input

source.

VIDEO 1

8REC z

(VIDEO 4)

To select the input

source.

VIDEO 4

(VIDEO 6)

To select the input

source.

VIDEO 6

(VIDEO 2)

To select the input

source.

VIDEO 2

(VIDEO 5)

To select the input

source.

VIDEO 5

qdCH +/–

Channel up: +

Channel down: –

qgRECALL

To operate JUMP,

FLASHBACK or

CHANNEL RETURN

function on the TV

depending on the setting

of the TV’s

manufacturer.

3VOL +/–

Volume up: +

Volume down: –

VCR

CBL (Cable box)

KEY DISPLAY

9POWER

1qa

FUNCTION

KEY DISPLAY

9POWER

1qa

1 – 9, 0, ENT For example, to change

to channel 5, press 0 and

FUNCTION

To turn on and off.

To change the channel.

1 – 9, 0, ENT For example, to change

to channel 5, press 0 and

5 (or , press 5 and ENT.)

5 (or, press 5 and ENT).

qdCH +/–

qgRECALL

Channel up :+

4INFO

(DISPLAY)

To expose the on-screen

display.

Channel down : –

To operate JUMP,

FLASHBACK or

CHANNEL RETURN

function.

q;TV/VIDEO To switch the antenna

(ANT/SW)

output.

qfSLEEP

(INPUT

To change the input

mode.

SELECT)

qhMENU

To call up the MENU

display.

qjf

To move the cursor

upward.

qjF

To move the cursor

downward.

qjG

To move the cursor to

the right.

qjg

To move the cursor to

the left.

qjOK

To enter the selection of

the MENU display.

To rewind.

To play.

8REC z

To fast-forward.

To record, press N

while pressing REC z*.

First release N, then

release REC z.

To stop.

To pause.

qdCH +/–

Channel up: +

Channel down: –

To exit the mode.

To select the deck.

7EXIT

qgRECALL

(DRIVE

SELECT)

* In order to avoid recording by

mistake, the REC z button does not

work by itself.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}4_ad1_.

Table of Preset Functions

(continued)

SAT

KEY DISPLAY

9POWER

1qaw;

DVD

KEY DISPLAY

9POWER

11 – 9, 0

FUNCTION

To turn on and off.

To change the channel.

To turn on and off.

Number buttons: To set

items selected from the

screen.

1 – 9, 0, ENT, For example, to change

DOT

to channel 5, press 0 and

5 ( or, press 5 and ENT)

w;DOT

(+10)

To select numbers 10

and above.

q;TV/VIDEO To switch the output of

(TV/SAT)

the SAT receiver to the

TV. (When you connect

a TV cable or antenna to

the receiver, the output

switches between a TV

and SAT program.)

qaENT

To enter the setting. To

set items selected from

the screen.

4INFO

(DISPLAY)

To show the current play

status on the screen.

6GUIDE

(CLEAR)

To clear the selected

characters from the

screen.

4INFO

(DISPLAY)

qfSLEEP

To turn on the display.

To use the “FAVORITE”

7RETURN

(EXIT)

To return to the last

previous screen.

(FAVORITE) function.

qsTWIN VIEW To bring up the Station

(Station

Index)

qfSLEEP

(SUBTITLE)

To switch the subtitle.

Index.

qhMENU

(DVD

MENU)

To display the DVD

menu.

6GUIDE

To bring up Master

Guide.

7EXIT

To exit the mode.

qjf

qjF

qjG

qjg

qjOK

To move the cursor

upward.

qhMENU

To call up the MENU

display.

To move the cursor

downward.

qjf

qjF

qjG

qjg

qjOK

To move the cursor

upward.

To move the cursor to

the right.

To move the cursor

downward.

To move the cursor to

the left.

To move the cursor to

the right.

To execute items

selected from the screen.

To move the cursor to

the left.

To rewind.

To play.

To bring up the Station

Index when a program

guide is not displayed.

To select the channel

that is highlighted.

8REC z

To fast-forward

To record, press N

while pressing REC z*.

First release N, then

release REC z.

qdCH +/–

Channel up : +

Channel down : –

To stop.

qgRECALL

To return to the last

tuned station.

To pause.

qd> (CH +) To proceed to the next

qkTOOLS

(OPTION)

To go into the OPTION

setting mode.

location or song.

channel up

qd. (CH –) To proceed to the

previous location or

song.

channel down

qkTOOLS

To display the DVD top

(TOP MENU) menu.

qgDRIVE

SELECT

To select the beck.

(RECALL)

* In order to avoid recording by

mistake, the REC z button does not

work by itself.

KEY DISPLAY

FUNCTION

DVR (Digital video recorder)

qjOK

To bring up the Station

Index when a program

guide is not displayed.

To select the channel

that is highlighted.

KEY DISPLAY

9POWER

1qaw;

FUNCTION

To turn on and off.

To change the channel.

1 – 9, 0, ENT, For example, to change

qdCHANNEL Channel up: +

DOT

to channel 5, press 0 and

5 (or, press 5 and ENT).

+/–

Channel down: –

2DIGITAL/

ANALOG

To replay

Or to go into REC/

q;TV/VIDEO To switch the output of

(INPUT)

the SAT receiver to the

TV. (When connecting a

TV cable or antenna to

the receiver, the output

switches between a TV

and SAT program).

(REPLAY*¹) REVIEW mode during

play (After about 5-

second rewind, replay

begins).

*¹This key corresponds to Tivo service or

the replay service. Refer to its instruction

manual for details.

4INFO

(DISPLAY)

7CLEAR

To turn on the display.

To clear the setting.

*²In order to avoid recording by

mistake, the REC z button does not

work by itself.

6GUIDE

(EPG)

To bring up Master

Guide.

To rewind.

To play.

8REC z

To fast-forward.

To record, press N

while pressing REC z*².

First release N, then

release REC z.

To stop.

To pause.

qhMENU

To call up the MENU

display.

qjf

To move the cursor

upward.

qjF

To move the cursor

downward.

qjG

To move the cursor to

the right.

qjg

To move the cursor to

the left.

qfSLEEP

To use the “FAVORITE”

(FAVORITE) function.

qsTWIN VIEW To bring up the Station

(S. INDEX)

Index.

qgRECALL

To select the channel

previously selected.

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}4_ad3_.

Table of Preset Functions

(continued)

KEY DISPLAY

9POWER

11 – 9, 0

KEY DISPLAY

9POWER

11 – 9, 0

FUNCTION

To turn on and off.

To select the track

number. 0 selects track

10.

To select the track

number. 0 selects track

10.

To select track numbers

above 10, see the

descriptions on the +10

button below.

To select track numbers

above 10, see the

descriptions on the +10

button below.

w;DOT

(+10)

To select numbers 10

and above.

w;DOT

(+10)

To select numbers 10

and above.

qaENTER

To enter the setting.

To select next disk.

qaENTER

To enter the setting.

qgRECALL

To select the next disc.

(D.SKIP)

To rewind.

To play.

To rewind.

To play.

To fast-forward.

To stop.

8REC z

To fast-forward.

To record, press N

while pressing REC z.

First release N, then

release REC z.

To pause.

qdCH + (>) To select the next track.

qdCH – (.) To select the previous

To stop.

track.

To pause.

4INFO

(DISPLAY)

To switch the display of

the CD player to ON/

OFF.

qdCH + (>) To select the next track.

qdCH – (.) To select the previous

track.

6GUIDE

To clear the setting.

(CLEAR)

4INFO

(DISPLAY)

To switch the display of

the CD player to ON/

OFF.

qkTOOLS

(PLAY MODE) mode cyclically.

To change the play

6GUIDE

To clear the setting.

(CLEAR)

qkTOOLS

To change the play

(PLAY MODE) mode cyclically.

7EXIT To toggle the recording

(REC MODE) mode.

qsTWIN VIEW To start synchronizing

(CD-SYNC)

with the CD.

DAT

KEY DISPLAY

9POWER

11 – 9, 0

AMP

KEY DISPLAY

9POWER

FUNCTION

To turn on and off.

To select a program

number.

To select the input

source: VIDEO 1

qaENTER

To enter the setting.

To rewind.

To select the input

source: VIDEO 2

To select the input

source: AUX

To play.

To fast-forward.

To select the input

source: TUNER

8REC z

To record, press N

while pressing REC z.

First release N, then

release REC z.

To select the input

source: CD

To select the input

source: TAPE

To stop.

To pause.

To select the input

source: MD

qdCH + (>) To proceed to the next

song.

To select the input

source: TV

qdCH – (.) To proceed to the

previous song.

To select the input

source: PHONO

4INFO

(DISPLAY)

To change the display

mode or turn the display

on/off.

To select the input

source: DVD

q;TV/VIDEO To change the input

(INPUT)

select cyclically.

qgRECALL

(SHIFT)

To shift band or preset

select.

DECK

KEY DISPLAY

9POWER

FUNCTION

qdCH+/–

Presetting or tuning

frequency up: +

To turn on and off.

To rewind.

Presetting or tuning

frequency down: –

To play.

3VOL +/–

Volume up: +

w;DOT (n)

To reverse.

Volume down: –

To fast-forward.

5MUTING

To mute the volume on

the AMP. Press again to

turn muting off.

8REC z

To record, press N

while pressing REC z.

First release N, then

release REC z.

qaENTER

To enter the setting.

To select FM/AM.

To stop.

6GUIDE

(BAND)

To pause.

qgRECALL

(A/B)

To select the tape deck:

Deck A or B (dual

cassette deck only).

7EXIT (z)

To record, press f while

pressing MENU. First

release f, then release

MENU.*

qjf (N)

qjF (x)

To play.*

To stop.*

qjG (M)

qjg (m)

qaENT (n)

To fast-forward.*

To rewind.*

To reverse.

qkTOOLS (X) To pause.*

* Activated when using a double

cassette deck

(for deck A of Sony component)

Continued

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}4_ad5_.

Table of Preset Functions

(continued)

Digital Cable Box

DAV (DVD/Receiver combo)

KEY DISPLAY

FUNCTION

KEY DISPLAY

FUNCTION

9POWER

To turn on and off.

9POWER

To turn the power on/

off

1qa1-9, 0, ENT To change the channel.

For example, to change to

channel 5, press 0 and 5

11 – 9, 0

Number buttons: To set

items selected on the

screen

(or, press 5and ENT).

q;TV/VIDEO Select either TV or Cable

w;DOT

(+10)

To select numbers 10

and above

(INPUT)

for viewing (By pass

mode).

qaENTER

To enter the setting

To rewind

4INFO

Calls up title bar and

toggles title bar on/off.

To play

qfSLEEP

(Favorite)

To switch the

“FAVORITE” TV

channel list

8REC*

To fast-forward

To record

programmed by a

customer to ON/OFF

To stop

To pause

6GUIDE

(EPG)

To switch the EPG

display to ON/OFF.

qkTOOLS

(TOP MENU) Menu

To display the Top

qhMENU

qjf

To call up the MENU

display.

4INFO

(DVD

DISPLAY)

To show the current play

status on the screen

To move the cursor

upward.

qd.

To proceed to the

previous location or

song

qjF

To move the cursor

downward.

qjG

To move the cursor to

the right.

qd>

To proceed to the next

location or song

qjg

To move the cursor to

the left.

q;INPUT

(TV/VIDEO) mode

To change the input

qjOK

To command to execute

for EPG.

qfSUBTITLE

To switch the subtitle

qjf

To move the cursor

upward

qdCH +

(PAGE +)

Channel up: +

qjF

To move the cursor

downward

CH –

(PAGE –)

Channel down: –

qjG

To move the cursor to

the right

qgRECALL

To toggle the current

channel/the last

previous channel.

qjg

To move the cursor to

the left

7EXIT

To exit the setting menu.

qjOK

qhMENU

To enter the selection of

the MENU display

qkTOOLS

(OPTION)

To display the function

tag.

To call up the MENU

7EXIT

(RETURN)

To return to the previous

display on the MENU

3VOLUME + Volume up (DAV)

3VOLUME – Volume down (DAV)

5MUTING

To mute the volume.

Press again to turn

muting off.

6GUIDE

To clear the setting.

(CLEAR)

* To avoid accidental recording, the

REC key does not work unless

pressed for more than 1 second

(factory setting).

Digital TV TUNER

KEY DISPLAY

9POWER

1qaw;

FUNCTION

To turn on and off.

To change the channel.

1 – 9, 0, ENT, For example, to change

DOT

to channel 5, press 0 and

5 (or, press 5 and ENT).

4INFO

(DISPLAY)

To display the current

channel.

qfSLEEP

qhMENU

qjf

To use the “FAVORITE”

(FAVORITE) function.

To call up the MENU

display.

To move the cursor

upward.

qjF

To move the cursor

downward.

qjG

To move the cursor to

the right.

qjg

To move the cursor to

the left.

qjOK

To enter the selection of

the MENU display.

qdCH +/–

Channel up: +

Channel down: –

qgRECALL

To operate JUMP,

FLASHBACK or

CHANNEL RETURN

function on the TV

depending on the setting

of the TV’s

manufacturer.

6GUIDE

(EPG)

To use the program

guide.

_{Download from Www.Somanuals.com. All Manuals Search And Downlo}4_ad7_.

Index

A, B

Batteries 8

C, D

Changing 22

CH (CHANNEL) button 13

Clearing/Changing

learned signal 22, 23

Power-On command 27

Code numbers 10, 13

Component Select buttons

assigning other components 33

programming a signal 16

programming a series of

commands 32

setting the Power-On function 27

Erasing 35

F, G, H, I, J, K

Factory setting 35

Learning Function 16

Locking control of the Commander 34

MUTING button 12, 15, 19, 26

N, O

Number buttons 11, 22

P, Q, R, S

Power-On function

setting 27

Preset components 10

System Control Functions 29

T, U

Troubleshooting 37

V, W, X, Y, Z

VOL buttons 12, 15, 19, 26, 35

Volume Control 12, 15, 25

Printed in China

Sharp All in One Printer AL 1551 User Manual
Sony CRT Television trinitron color tv User Manual
Sony Stereo Receiver STR DE997 User Manual
SOYO Computer Hardware SOYO Motherboard User Manual
Star Manufacturing Gas Grill CG10 User Manual
StarTechcom Network Card EC1000S User Manual
Sterling Marine Instruments S 9210 User Manual
Sterling Plumbing Indoor Furnishings C7111F User Manual
Sylvania Flat Panel Television LC200SL9 User Manual
Symbol Technologies Network Card 1 PortPower over Ethernet User Manual